MachineValley's Limpet Coil Reactor with Internal Coil is built with a single-wall vessel wrapped externally in a spiral half-pipe (limpet) coil, plus an additional coil mounted inside the vessel itself. This dual heat-transfer surface design significantly increases the total area available for heating or cooling, cutting cycle times for processes that need rapid temperature change or high thermal load.
MachineValley's Half Coil Reactor, also known as a Limpet Coil Reactor, uses a series of half-pipe coils welded spirally around the vessel shell instead of a conventional full jacket. This design withstands higher heating/cooling media pressures and delivers faster, more efficient heat transfer than a standard jacket, making it ideal for high-temperature reactions, high-pressure steam applications, and processes needing rapid thermal cycling.
MachineValley's Jacketed Reactor is a temperature-controlled mixing vessel for jobs where heating or cooling accuracy actually matters mid-process. A double-wall jacket carries steam, hot water, or chilled water around the vessel, so the batch heats or cools evenly instead of getting hot spots. Capacity runs 500kg to 10,000kg, drive power from 11 kW to 300 kW — and it turns up wherever thermal control affects the end product: chemical, paint, pharma, food, cosmetics.
MachineValley Multi-Functional Mixing Kettle is a triple-shaft mixing system combining an anchor scraper, high-speed disperser, and a configurable third blade (screw, butterfly, emulsifier, or multi-layer inclined blade) in one vessel. Purpose-built for medium-to-high viscosity products, it's the ideal solution for adhesives, sealants, printing paste, inks, pigments, putty, and coatings on SC production lines.
MachineValley's High Shearing Mixing Reactor runs two agitators at once. A high-speed rotor spins inside a stator, and that's where the actual shearing happens: friction and collision break the material down. Meanwhile, a slower anchor arm with triangular blades scrapes the kettle wall so nothing cakes on the sides, wetting the powder as it goes instead of letting it clump at the bottom.
MachineValley's Triple Shaft Mixing Reactor is a three-motor, stainless steel mixing system combining an anchor scraper, a high-speed disperser, and a configurable third shaft selectable as a screw, butterfly-type blade, emulsifier, or multi-layer inclined blade. Engineered for medium-to-high viscosity products, it's built for SC (Sealants & Coatings) production lines, delivering thorough scraping, dispersion, and homogenization in a single vessel.
MachineValley's Double Shaft Mixing Reactor/Kettle runs two shafts in one tank: a dissolver disc up to 1440 rpm for breaking down pigment and agglomerates, and a slower scraper that sweeps the wall and base the whole time it's running. On bigger batches especially, that second shaft is the difference between an even mix and a ring of unmixed material stuck to the sides.
This Low-Speed Mixing Kettle/Reactor from MachineValley is a jacketed reactor dissolver for viscous liquids up to 8500 cps. It comes with a vacuum design, inverter-controlled speed, and a heating/cooling jacket, and it's built for steady batch mixing in paint, ink, and pigment production.
